Home / Areas

Service Areas

PowerCut supplies backup solutions from its Randburg base to homes and businesses across Gauteng. Local area pages explain the kinds of properties, power priorities and installation considerations commonly seen in each area.

Service Areas

How to choose the right Gauteng service area page

If you are comparing service areas, start with the type of property you have and the loads you need to keep running during outages. A townhouse in Fourways may need a compact inverter and battery setup for lights, WiFi and a few plugs, while a business in Midrand might need a larger system for computers, gate motors, tills or refrigeration. Coastal humidity is not the main issue in Gauteng, but dust, heat and long outage periods still matter when choosing battery location and ventilation.

Use the area pages to match your suburb with the usual wiring conditions, building layouts and backup priorities seen there. That makes it easier to plan site assessments, essential circuit wiring and battery placement before installation. If you are unsure, our team can help you narrow it down through the enquiry form on our contact page.

Where PowerCut works across Johannesburg and the northern suburbs

We support homes, sectional title units, offices, retail spaces and light industrial sites across the northern and central parts of Gauteng. Some areas need neat space-saving installs because of smaller utility rooms, while others need larger battery banks and cleaner cabling for busier electrical boards. In older properties, a proper assessment helps identify what must stay on backup and what should be left off to avoid overloading the system.

  • Randburg, Johannesburg
  • Sandton
  • Fourways
  • Roodepoort
  • Midrand
  • Pretoria
  • Centurion

Each suburb comes with its own mix of building age, board layout and usage patterns, so service areas are more than just map pins. They help us plan the right labour, wiring and commissioning approach for the site.

Book a site check

Share what must stay on during an outage and the size of the property, and a backup planner will phone or message you.

Contact form

What local installation needs usually come up

Most backup systems need careful sizing so the inverter and lithium batteries support the essential circuits you actually use during load-shedding. That can include lights, internet, a TV point, alarm systems, a router, office workstations or selected kitchen appliances. We also look at how often outages happen in the area, how long they last and whether the property has room for future battery expansion.

  • Site assessments for load checks and board inspection
  • Backup sizing based on essential usage
  • Inverter installation and battery installation
  • Changeover solutions for cleaner switching during outages
  • System commissioning and fault checks
  • Monitoring setup for easier day to day use

A well planned system should be practical, not oversized for the sake of it. The point is to keep the important circuits running and avoid nuisance tripping or poor battery use.

Compliance for homes, estates and business sites

Any installation must be done by a registered electrician, and the system needs a certificate of compliance once the work is complete. That applies whether you are fitting backup for a family home in Centurion or a small office in Roodepoort. If the system is grid-tied, it also needs municipal registration and the right approval steps before it is put into service.

This matters because backup systems must be wired correctly, isolated properly and commissioned with the rest of the installation in mind. We provide compliance support around the process, but the final electrical work and sign-off must follow the legal requirements. It is better to get that sorted early than to deal with headaches later on.

Service areas for residential and commercial backup power

Different parts of Gauteng need different backup priorities. In residential suburbs, clients often want lights, internet and a few power points to stay on during load-shedding. In commercial spaces, the focus is often on continuity for workstations, point-of-sale equipment, security systems and business critical equipment. The right approach depends on what you can live without and what must stay on.

We work with clients who need one-off installations, battery expansions, routine servicing and fault checks after an outage or failed switch-over. If your property has already been adapted for backup power, we can review what is working and what needs attention before the next stage of the system is added.

Speak to the right team for your area

Our Randburg base supports the wider Gauteng service footprint, with local coordination handled by Sifiso Ngobeni, Ayesha Ntuli, Marnus Rabie, Nompumelelo Sigcau, Sibusiso Govender and Rentia Fouche. That means enquiries are handled with a clear path from first assessment through to planning, installation support and aftercare. No matter which suburb you are in, the aim is the same: a sensible backup setup that suits the property and the load pattern.

To get started, send your details through the enquiry form on our contact page and tell us your suburb, the type of property and what you want to keep powered. We will help you work out the next step for a home or business setup that fits the area and the way you use electricity.

Choose the area, then choose the loads that matter most.

Sizing, install and battery questions

Which Gauteng areas do you cover?

We supply backup solutions from Randburg across Johannesburg, Pretoria, Centurion, Midrand, Roodepoort, Sandton and Fourways, with support for homes and businesses in surrounding Gauteng areas too.

Do I need compliance paperwork for a backup installation?

Yes, this is normally required. The installation must be done by a registered electrician and the completed work must have a certificate of compliance. Grid-tied systems also need municipal registration.

Can you help if I do not know what size system I need?

Usually, yes. We can assess your essential loads, check the board and wiring, then advise on inverter and battery sizing so the system matches your property and usage.

Tell us what has to stay on, and we will size it.

Contact form